Laboratory Equipments

• High torque even at low speeds
• Monitoring of set & actual speed
• Wide range of impellers
• Advanced Stirrers with microprocessor technology
• Advanced Stirring speed control through VFD
• Constant speed even with change of load / Voltage
• Easy -to- read display of set & actual parameters
• Last parameter recall. Ideal for repetitive processes
• Accepts shafts up to 13mm
• Key less chuck
• Motor protection in case of continuous overload
• Stopper for protection of vessel & shaft
• Special base design for topple free operation

• Delivery Time: Ready Stock

• Better speed regulation even with small volume & low speeds
• Accurate stepless speed control maintains excellent speed stability.
• Totally enclosed unit

• Delivery Time: Ready stock

Technical Specification

Autoclave is double walled complete made of S.S.304, Inner & outer with Foot Lifting Arrangement & heavy gauge Dia press lid fitted with 2 safety valve, 1 Steam Release Valve & pressure gauge.

Working Pressure                    :           UPTO 15 PSI

Working Temp                        :           121 ??C to 125 ??C

Temp.controlled By                :           PID Controller with timer & purging system PID                                                                              controller

Solonaid Valve Systems         :           This Valve work for automatic Purging & Automatic Steam                                                             Release when cycle Time is Complete

Safety Protection for heater    :           Low water Level cut off systems to cut off Heater when                                                                 water level is Not Proper.

We Tech Vision Enterprises, are top notch suppliers of UV Vis spectrophotometer

• Delivery Time: Ready stock

• The LMMS-300 hot plate magnetic stirrer is operated by a digital control CPU. The CPU regulates the heating up to 300 °C.
• Stirring speed is also controlled by the CPU from the keypad while the stirring speed is indicated on the bar graph.
• Operator can setup the objective temperature, hold temperature, stirring time and speed.
• Connect the temperature probe and place into glass container being stirred to measure and maintain the object temperature. Accuracy is +1 °C.

• Delivery Time: Ready Stock

• Stainless Steel centrifuge Chamber, easy to clean
• Brushless Induction motor with variable frequency drive
• Microprocessor controller with digital display
• Stable speed output.
• Even under unstable voltage conditions
• Smooth & soft start
• Low sample temperature rise

• Delivery Time: Ready Stock

• Manual Temperature Compensation
• There is a microprocessor chip inside the meter and the appearance of meter looks
• nice with user friendly operation. Some of the features are as under
• Large LCD display with blue background simultaneous display of pH and temperature
• It has intelligent functions for calibration, data storage / Memory.
• Automatically display the percentage of slope after calibration is over.
• Equipped with electrode holder and calibration buffer solution, which is more convenient to use.

• Delivery Time: 1 Week

• Specially designed for performing efficient DNA/RNA Extraction.
• Available with specially designed aerosol tight cap rotors to prevent bio-contamination for COVID - 19 During testing.
• Compact table top centifuge fitd easily in Bio safety caninet.

• Delivery Time: Ready Stock

• Low sample temperature rise.
• inverter fault detection with auto shutdown.
• 7 segment LED display of speed.
• Dynamic brake for quick deceleration.

• Delivery Time: Ready Stock

• Automatic rotor  identification, ensures operator safety.
• Stainless steel centrifuge chamber, easy to clean.
• Brushless induction motor with variable requency drive.
• Microprocessor controller with digital display.
• smooth and soft start.

• Delivery Time: Ready Stock

• During the pH mode, Up to 5 points push-button calibration with auto-buffer recognition
• Selectable pH buffer standards and temperature units.
• Automatically calculates and displays electrode slope after calibration.
• During the ion mode, 2 to 5 points push-button calibration from low to high concentrations
• Direct readout ion concentration simplifies the elaborate measurement process.
• Automatic Temperature Compensation (ATC) ensures highly accurate measurements over the entire range.
• Automatic endpoint function freezes the stable measured values for easy reading and recording data.
• Calibration due reminder prompts you to calibrate the meter regularly.
• Help message as a operational guide to helps you understand how to use meter.
• Setup menu lets user customizes buffer standards, calibration points, stability conditions, resolution,
• measurement units, date and time to meet measurement requirements.

• Delivery Time: 1 Week

• Auto Range function
• Selectable Speed
• Direct Viscosity reading and temperature display
• Big Ultra Bright Backlight LCD Display
• Optional - Datalog Software for LMDV-100

• Delivery Time: 1 Week

• Auto Range function
• Selectable Speed
• Direct Viscosity reading and temperature display
• Big Ultra Bright Backlight LCD Display

• Delivery Time: 1 Week

• Inner Tank & Outer body made of Stainless Steel
• Digital RED LED display
• Temperature with timer function
• Ceramic heaters provides improved heating effect
• Drainage and cool fan available in 6L to 25L
• Overheat protector, Cooling fan
• Moisture-proof PCB
• User friendly
• High-performance transducers

• Delivery Time: 1 Week

• These are designed for homogenization, emulsification and dispersion and mixing of fluids at high speed. 
• The user has a choice of selecting from AC Drive or AC/DC Drive with stepless speed regulations for continuous variation of speed as per requirements.

• Delivery Time: Ready Stock

* Dogital LCD Display with back light
* ceramic hot plate with flame protection and durability
* Over Temperature alarm
* Speed : 100-1600RPM
* Max capacity : 5 ltr
* Max Temperature : 300°C

• Delivery Time: Ready stock

• These are low priced units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathlogical laboratories and hospitals for routine centrifuging tests.
• Available with Swing out and Angle rotor

• Delivery Time: Ready Stock

• Touchscreen display - 4.3 inches TFT
• User Password Protection available
• Microprocessor controlled and completely programmable.
• Large LCD display with Time setting .
• Temperature Indicator and controller.
• Auto-tuning for convenience and optimal processing efficiency.
• Variable Power Output control.
• Auto frequency tracking
• Output amplitude 0-100% adjustment.
• Automatic fault alarm.

• Delivery Time: 1 Week

We are the Leading Suppliers of Dissolved Oxygen Meter at Very Competetive Market Price. Specifications are mentioned below:

• 1 or 2 points auto-calibration (100% in saturated air or air-saturated water, 0% in zero oxygen solution). 
• Automatically compensates salinity and barometric pressure after manual input. 
• Selectable readout in ppm, mg/L or % saturation. 
• Selectable temperature units between degrees Celsius ( C) and degrees Fahrenheit ( F). 
• Automatic Temperature Compensation ensures high accuracy of measurements. 
• Automatic endpoint function freezes the stable measured values for easy reading and recording data. 
• Calibration due reminder prompts you to calibrate the meter regularly. 
• Help message as an operational guide to helps you understand how to use meter. 
• Setup menu lets user customize calibration points, resolution, stability condition of measurements, temperature units, date/time to meet personal preferences. 
• Reset function allows user to returns all settings to the factory default values. 
• Expand memory stores and recalls up to 500 readings. 
• Built-in real-time clock stamps stored data to meets GLP standards.

• Delivery Time: 1 Week

Variable speed 50-100 RPM electric motor with gear chain for uniform speed in all multiple spindle stirrer and fluorescent tube for 1 Ltr beaker supplied without glass parts

• Delivery Time: 2-3¿¿week

• Digital speed indicator.
• Stepless speed regulator.
• 0-99 minutes digital countdown timer.
• Imbalance detector with cutoff.

• Delivery Time: Ready stock

• Keypad control.
• Sharp viewing screen for close up or distance viewing.
• Direct reading of viscosity.
• Push for determining full scale range (FSR) viscosity.
• complete range capability

• Delivery Time: Ready stock

• Better speed regulation even with small volume & low speeds
• Accurate stepless speed control maintains excellent speed stability.
• Totally enclosed unit

• Delivery Time: Ready stock

• Designed for mixing liquids in Schools, Laboratories & Factories.
• Touch / Continous operation mode Selection through bi-directional Switch.
• Speed Regulation through knob provided on control panel.
• Interchangeable mixing heads for use with variety of tubes

• Delivery Time: Ready Stock

• Advanced technologies, WINDOWS operating system.
• Automatic restart after power failure.
• Each thermal block has 4 independent temperature control sensors and 8 peltier heating units to ensure accurate and
• uniform temperature across block surface, and provide users with replicating previous condition set-up.
• 8” TFT color touch-screen with graphical display provides easy use for setting up and monitoring set parameter.
• The actual and target temperatures can be viewed and displayed graphically in real time.
• Built-in 11 standard program file template, can quickly edit the required files.
• Internal flash memory for 10000 typical PCR files in free configurable folders.
• Compatible with mouse, keyboard, capable to transfer data and perform software updates via USB Drive.
• Applicable with the following 0.2ml tube models: non-skirted, semi and fully skirted plated.
• Replaceable module, dual-block module can simultaneously run two different PCR programs

• Delivery Time: 1 Week

• Hermetically sealed Compressor with CFC free refrigerant
• Chamber calibration port on side
• Adjustable trays
• Output for remote alarm
• Unique design of thermal barrier for better energy efficiency
• Machine filled CFC free PUF insulation to eliminate void pockets
• Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber within permissible limit Heating by long life SS tubular heaters

• Delivery Time: Ready stock

• Microprocessor controller with LCD display capacitance type sensor.
• Auto running controller.
• Battery backup for controller.
• Settable high / low alarm points.
• Auto door closer

• Delivery Time: Ready stock

• An ergonomic handle hook design for easy grip in the palm
• A Clever design for the tip eject button
• A Clear reading window
• Availability for Autoclave of the tip and the pusher, also detachable to facilitate
• cleaning and maintenance
• A tip cone made of durable chemicals materials, with excellent chemical
• corrosion resistance

• Delivery Time: 1 Week

• The two detectors are used to measure sample and reference respectively and simultaneously for optimizing measurement accuracy.
• Lamp Selection enables conserving the life of D2 & Tungsten lamps. Real time clock for date & time stamping of results.

• Delivery Time: 1 Week

• Touch screen colour display.
• Temperature display.
• Faraday magneto-optical modulator.
• Polarizer Polarizing film.
• Digital Polarimeter based on Optical null principle.

• Delivery Time: 1 week

• Turbidity meter with TSS measurement mode, selectable four turbidity units.
• Turbidity meter is equipped with a 4.5" TFT display.
• 2 to 7 points calibration using the Formazin Standards.
• Password protection prevents the unauthorized calibration and settings

• Delivery Time: 1 Week

• Heating coil made from special air heater  fitted on left & right side of oven.
• A forced air circulating with motor fitted on top for uniform temperature through out the chamber.
• Temperature controlled by microprocessor PID dual display controller fitted on top.
• Working Temp.:80 °C to 400 °C .Accuracy ±2°C 

• Delivery Time: 2-3 Weeks

• Digital Display With High Precision.
• Compact Size , Easy To Carry.
• Portable & Light Weight.
• The Battery Has Overload Protection In Case Of Short Circuit And Leakage Of Electricity.
• It Also Can Tell You When The Battery Is Running Low.
• It Adopt The 3.7v Lithium Battery And Auto Shut Off With No Operation In 10 Minutes.
• Peak Hold Model And Real-time.

• Delivery Time: Ready Stock

• Construction: Double walled outer body made of S.S. 304 & Inner body made of S.S. 316.
• Insulation: Glass wool Insulation between two walled for lost of heat.
• Temp Range: 5 °C Deg above ROOM TEMPRATURE   to 60 °C Deg
• Accuracy: +/- 0.5°C
• Temp controlled by: Auto tunes  MICROPROCESSOR PID Controller with dual display to view set & current temp.
• Door: Inner Acrylic door & outer S.S. door.
• Air Circulation System: Air Circulation fan with motor & blower of 1/20 HP motor & 1440 RPM.
• Door Packing: Silicon Gasket.
• Heating System: By tubular S.S. Heater

 

• Delivery Time: 2-3¿¿weeks